子夜精品视频在线

    <s id="x2oxh"><object id="x2oxh"></object></s>

    1. <rp id="x2oxh"></rp>

      TAIXING PETROLEUM MACHINERY CO., LTD.

      88, Chezhan Rd., Taixing City, Jiangsu Province, 225401, P.R. China

      Tel/Fax: 86-523-87684345 Mobil: 15961036326 Email: yrs71@163.com

      Send us email

      CNPC SINOPEC CNOOC API

      ÖÐÎÄ

      A reliable supplier for drill pipe elevator, casing elevator, drill collar elevator, tubing elevator, slip type elevator, single joint elevator, sucker rod elevator, elevator links, perfection links, safety clamps, tubing spider and hose loops, swivel joints, pup joints, plug valves

      About Us

      API Licenses

      Quality Control

      Contact Us

      ¡¡

      Tubing Elevator

      General

      Tubing elevator is designed and manufactured in line with API Spec 8C ¡°Specification for Drilling and Production Hoisting Equipment¡±, and tubing elevator can be available with DD models, TA models and BDA models. In China or Russia, CD and BD tubing elevators are often asked for. DD models, TA models and BDA models tubing elevators are center latch elevator, while CD tubing elevator is side door model, BD tubing elevator is a special tubing elevator designed and popular in China.

      DD Tubing Elevator

      DD tubing elevators are conventional collar type center latch elevators for handling tubing in oil and gas drilling operation, DD tubing elevators are cast from high quality alloy steel, heat-treated, NDT and MPI. The rated load is 125ton, and cover pipe sizes from 2⅜" to 4½" OD, IU or EU, each tubing elevator is 1.5 times of the working load tested. DD tubing elevators are constructed in two halves of practically the same weight for better balance, and have a latch mechanism for the two halves at the center with latch and lock combination with a safety latch lock, DD tubing elevators are equipped with easy operating handles, link ears conform to API elevator links, handles are at rear and can be properly balanced while operating, API monogram in conjunction with numbers, product series numbers are die stamped on shoulders of tubing elevators for tracing, and tubing elevators shoulders are die stamped with size of tubing and rated working capacity. Manufacturer¡¯s name plates are provided on bodies of tubing elevator, warranty for tubing elevators are listed in tubing elevator manual.

      Partial technical data for DD tubing elevators are offered as follows:

      Elevator Model

      Type of tubing

      (in)

      Elevator top bore

      (mm)

      Elevator bottom bore

      (mm)

      Rated Load

      Ton

      DD 2⅜/(load)

      2⅜

      62.31

      62.31

      125

      DD 2⅜EU/(   )

      2⅜EU

      68.66

      68.66

      DD 2⅞/(        )

      2⅞

      75.01

      75.01

      DD 2⅞EU/(   )

      2⅞EU

      81.36

      81.36

      DD 3½/(        )

      90.88

      90.88

      DD 3½EU/(   )

      3½EU

      98.02

      98.02

      DD 4/(          )

      4

      103.58

      103.58

      DD 4EU/(      )

      4EU

      110.72

      110.72

      DD 4½/(        )

      116.66

      116.66

      DD 4½EU/(   )

      4½EU

      123.42

      123.42

      tubing elevator

      Configuration and Description of DD tubing elevator

      S.N.

      Description

      Qty

      1

      Body

      1

      2

      Door

      1

      3

      Latch

      1

      4

      Cotter pin

      3

      5

      Split pin

      1

      6

      Latch lock

      1

      7

      Grease fitting

      1

      8

      Door lug pin

      1

      9

      Link block bolt

      2

      10

      Latch cam

      1

      11

      Split pin

      2

      12

      Link block pin

      2

      13

      Link block

      2

      14

      Latch spring

      1

      15

      Latch lock pin

      1

      16

      Latch pin

      1

      17

      Latch pin retainer

      1

      18

      Hinge pin retainer

      1

      19

      Hinge pin

      1

      Configuration and exploded figure for DD tubing elevators are the same for diffrent dimension or working load of elevator. Body and door are not used as replacement parts, others are replacement parts. Replacement parts of DD tubing elevators offered by Taixing Company cannot be interchangeable with those tubing elevators supplied by other manufacturer.

      ¡¡

      TA Tubing Elevator

      TA tubing elevators are conventional collar type center latch elevators for handling tubing in oil and gas drilling operation, TA tubing elevators are cast from high quality alloy steel, heat-treated, NDT and MPI. The rated loads rang from 100ton to 150ton, and cover pipe sizes from 2⅜" to 4½" OD, IU or EU, each tubing elevator is 1.5 times of the working load tested. TA tubing elevators are constructed in two halves of practically the same weight for better balance, and have a latch mechanism for the two halves at the center with latch and lock combination with a safety latch lock, TA tubing elevators are equipped with easy operating handles, link ears conform to API elevator links, handles are at rear and can be properly balanced while operating, API monogram in conjunction with numbers, product series numbers are die stamped on shoulders of tubing elevators for tracing, and tubing elevators shoulders are die stamped with size of tubing and rated working capacity. Manufacturer¡¯s name plates are provided on bodies of tubing elevator, warranty for tubing elevators are listed in tubing elevator manual.

       Partial technical data for TA tubing elevators are offered as follows:

      Elevator Model

      Type of tubing

      (in)

      Elevator top bore

      (mm)

      Elevator bottom bore

      (mm)

      Rated Load

      Ton

      TA 2⅜/(load)

      2⅜

      62.31

      62.31

      100

      125

      150

      TA 2⅜EU/(   )

      2⅜EU

      68.66

      68.66

      TA 2⅞/(       )

      2⅞

      75.01

      75.01

      TA 2⅞EU/(   )

      2⅞EU

      81.36

      81.36

      TA 3½/(       )

      90.88

      90.88

      TA 3½EU/(   )

      3½EU

      98.02

      98.02

      TA 4/(          )

      4

      103.58

      103.58

      TA 4EU/(     )

      4EU

      110.72

      110.72

      TA 4½/(       )

      116.66

      116.66

      TA 4½EU/(  )

      4½EU

      123.42

      123.42

      tubing elevator TA model

      Configuration and Description of TA tubing elevator

      tubing elevator configuration

      S.N.

      Name

      Qty

      1

      Body

      1

      2

      Latch pin

      1

      3

      Latch spring

      1

      4

      Door

      1

      5

      Link Block

      2

      6

      Hinge pin

      1

      7

      Hinge Pin Retainer

      1

      8

      Latch

      1

      9

      Latch Lock Pin

      1

      10

      Latch Lock

      1

      11

      Latch Lock spring

      1

      12

      Link Block Bolt

      2

      13

      Cotter Pin

      2

      14

      Split Pin

      2

      15

      Grease fitting

      2

      16

      Link Block Pin

      2

      Configuration and exploded figure for TA tubing elevators are the same for diffrent dimension or working load of elevator. Body, door and latch are not used as replacement parts, others are replacement parts. Replacement parts of TA tubing elevators offered by Taixing Company cannot be interchangeable with those tubing elevators supplied by other manufacturer. 

      BDA Tubing Elevator

      BDA tubing elevators are conventional collar type center latch elevators for handling tubing in oil and gas drilling operation, BDA tubing elevators are cast from high quality alloy steel, heat-treated, NDT and MPI. The rated loads rang from 65ton to 100ton, and cover pipe sizes from 2⅜" to 3½" OD, IU or EU, each tubing elevator is 1.5 times of the working load tested. BDA tubing elevators are constructed in two halves of practically the same weight for better balance, and have a latch mechanism for the two halves at the center with latch and lock combination with a safety latch lock,BDA tubing elevators are equipped with easy operating handles, link ears conform to API elevator links, handles are at rear and can be properly balanced while operating, API monogram in conjunction with numbers, product series numbers are die stamped on shoulders of tubing elevators for tracing, and tubing elevators shoulders are die stamped with size of tubing and rated working capacity. Manufacturer¡¯s name plates are provided on bodies of tubing elevator, warranty for tubing elevators are listed in tubing elevator manual.

      Partial technical data for BDA tubing elevators are offered as follows:

      Elevator Model

      Type of tubing

      (in)

      Elevator top bore

      (mm)

      Elevator bottom bore

      (mm)

      Rated Load

      Ton

      BDA 2⅜/(load)

      2⅜

      62.31

      62.31

      65

      100

      BDA 2⅜EU/(   )

      2⅜EU

      68.66

      68.66

      BDA 2⅞/(        )

      2⅞

      75.01

      75.01

      BDA 2⅞EU/(    )

      2⅞EU

      81.36

      81.36

      BDA 3½/(        )

      90.88

      90.88

      BDA 3½EU/(   )

      3½EU

      98.02

      98.02

       tubing elevator

      Configuration and Description of BDA tubing elevator

       

      S.N.

      Name

      Qty

      1

      Body

      1

      2

      Door

      1

      3

      Latch

      1

      4

      Latch Lock

      1

      5

      Link Block

      2

      6

      Link Block Nut

      2

      7

      Link Block Bolt

      2

      8

      Split Pin

      2

      9

      Grease fitting

      2

      10

      Latch Lock Pin

      1

      11

      Pin

      2

      12

      Latch Lock spring

      1

      13

      Hinge Pin Retainer

      1

      14

      Hinge pin

      1

      15

      Door Spring

      1

      16

      Latch pin

      1

      17

      Roller

      1

      18

      Roller pin

      1

      19

      Latch spring

      1

      Configuration and exploded figure for BDA tubing elevators are the same for diffrent dimension or working load of elevator. Body, door and latch are not used as replacement parts, others are replacement parts. Replacement parts of BDA tubing elevators offered by Taixing Company cannot be interchangeable with those tubing elevators supplied by other manufacturer. 

      ¡¡

      The information of our products listed in this website is provided in line with API Specifications and China's National Standards, description for any product can help readers make their own decisions.

      For any comments, please contact us at yrs71@163.com

      Copyright (C) 2008 Taixing Petroleum Machinery Co., Ltd.  All rights reserved (Register No. SU ICP 08100726)

      子夜精品视频在线

      <s id="x2oxh"><object id="x2oxh"></object></s>

      1. <rp id="x2oxh"></rp>